FTTH tool kit is a portable optical meter used during the operation, installation, or maintenance operation of optical fiber network. The durable and easy to use power meter is designed to offer accuracy and simplicity. The cold construction kit is an FTTX-FTTH rapid connection for fiber cutting, constructing rubber-insulated wire stripping. Besides that, it’s also used in the testing and cleaning process.
Note that this is a versatile tool-kit that perfectly handles multiple tasks. The multi-purpose cold connector comes with a 1 mW Visual-Fault Locator Tester Meter that offers efficiency. Users are guaranteed of simplicity during operations, especially during the removal or installation of single fiber adapters or to effectively alternate mass and a single-fiber cleaving.
The FC-6S fiber optic cleaver has a single adapter with 250 to 900-micron single fibers that are coated.
Compact size, lightweight, and portable.
It provides accurate mechanical tolerances resulting in a smooth and clean work operation.
The optical fiber tool kit is designed for multi-purpose use.
Method of Operation
1. First, open the switch on the fiber plate cover. Thereafter, open the single-core fiber clamp’s plate.
Note: check to confirm the knife holder’s position on the front side.
2. Determine the V-groove found on the single-core fiber clamp and then place your optic fiber there. Ensure that the fiber aligns with the fiber in order to remove any boundary line formed and the fixture’s scale.
3. The single-core fiber clamp has a clip that you should cap in order to clamp the fiber. Thereafter, you need to close the fiber plate’s cover and then push inward the tool holder so as to cut the fiber.
4. Lastly, the fiber-optic panel cover should be opened as well as the fiber-optic clip. This should be done while opening the single-core fiber clamp’s clip. Once you have finished, make sure that you collect all the fiber debris.