Uncategorized
Showing 1–16 of 26 results
-
0.36 LED DC Voltage Meter Panel 0-100V 3 Wire with Head Housing Digital Voltmeter Electric Gauge Accuracy Volt Monitor Tester, Red, Green Display
- Display: 0.36″ LED Digital Panel
- Measuring range: DC 0-100V
- Refresh rate: about 200ms/ time
- 3 Wires: Equipped with 3 lead wires with port
- Operating Temperature: -10-+65 ℃
-
2 Wire Green Dc 4.0-30v LED Panel Digital Display Voltage Meter Voltmeter
- Measure voltage: DC2.7-30V (two wires Access)
- Measurement precision:0.01V(2.7-10V); 0.1V (10-30V)
- Display: Three 0.56
- Display color: Green
- Operating temperature: -10°c to 65°c
-
5 in 1 Digital Environment Meter Thermometer Hygrometer Anemometer Sound Level Light Air Velocity Humidity Tester
- 1.This is a 5 in 1 for Light meter, Sound level meter,Humidity/Temperature meter, Anemometer.
- 2.℃/℉ unit switchable,m/s, km/h, ft/min, knots, mph unit switchable.
- 3.Low power consumption:auto power off,low battery indication.
- 4.Convenient to use: with large LCD backlight display and data hold function.
- 5.More advantages:over-range indication,max value display,total accuracy apply for C. I. E standard .
-
Battery Monitor,10-100V Digital Battery Capacity Tester, Percentage Level Voltage Temperature Switch Meter Gauge 12V 24V 36V 48V LCD Display Marine RV Battery Power Indicator Panel
- APPLICABLE BATTERY — InsManor digital battery monitor is suitable for 10-100V (12v 24v 36v 48v 60v 72v 96v) lithium battery, lead-acid battery, lithium iron phosphate battery, Ni MH battery. Default 12 volt lead acid battery.
- APPLICATION — this multimeter can be used as battery voltage meter, battery capacity tester and temperature indicator panel for car, marine, RV, boat, etc.
- PROTECTION — the battery power detector comes with protective shell, dustproof waterproof surface; input reverse connection protection.
- LCD DISPLAY — the battery status reader adopts clear LCD color screen, displays battery capacity, voltage, temperature value(switched by the key).
- ALARM — if low voltage, red indicator flashes and buzzer alarms.
-
Battery Tester, Digital LCD Universal Battery Checker for AA AAA C D 9V 1.5V Button Cell Batteries (Model BT-168D)
- Do not need internal battery
- PORTABLE & PRACTICAL: Small and light weight, but effective, quickly test the voltage of your battery, display by digital.
- COMPATIBLE: Universal battery checker for most of household batteries. Check the power level of AA, AAA, C, D, 1.5V,9V and button type miniature cells.
- NO NEED BATTERIES TO OPERATE: Digital battery tester has no internal battery. It is powered by the battery being tested.
- IDEAL TOOL FOR HOME USE: Test if the battery is good, low, or needs to be replaced. A must buy household measuring tools. Quick test shows if the battery needs a replacement or not.
- NOTE – The battery tester is activated by the battery being checked. Keep test times as short as possible, to avoid unnecessary battery drain.Any Questions Or not Satisfied with the item, welcome to CONTACT US and we will be always there.
-
DC 6.5-100V 0-100A LCD Display Digital Current Voltage Power Energy Meter Multimeter Ammeter Voltmeter with 100A Current Shunt
- Test range: Voltage: DC 6.5~100V; Current: 0~100A; Power: 0~10kW; Energy: 0~9999kWh
- Store energy data when power off(can be reset to 0). The blue backlight can be turned on/off manually
- With overload alarm function(If active power is larger than threshold, backlight and power will flash)
- 4 in 1 meter; Large-screen LCD (displays voltage, current, active power, energy at the same time)
- Note: Only display and shunt are included. It doesn’t include any wire or accessories
-
Digital Anemometer, Wind Speed Meter, Air Flow Velocity Temperature Measuring Wind Chill with Thermometer LCD Backlight for Sailing Surfing Fishing Etc
- ✦ Mini Size& Portable Design – Compact and lightweight, you can keep it in pocket. Come with a yellow protective case and wrist strap. The rubber outer case provides good protection, and the wrist strap ensures you don’t lose the anemometer in a strong wind.
- ✦ Multi-Function – Provides fast wind speed and temperature measurement for analysis of critical environment conditions Data Hold Function; High Precision Pressure Sensor; Air velocity; wind speed and temperature measurement; ℃/℉ temperature selection; Current / max / average wind speed reading Data Hold Function; Auto/ Manual Power Off; Low battery indication.
- ✦ Power Saving – Powered by a 3V CR2032 battery( included ), It has a low battery indicator with Manual/Auto Power Off functions.
- ✦ Versatility – Our anemometer is ideal for home purpose such as measuring wind speed, air blower, temperature of CPU computer fans, and also can be used for windsurfing, sailing, fishing, kite flying and mountaineering. Suitable for power industry, steel industry, petrifaction industry, manufacturing industry, etc..
- ✦ Backlight LCD Display – This handheld digital wind speed anemometer with a large LCD screen can display the data clearly. Back-light makes you easy to read and accurate in low light areas or night.
-
Digital Laser Measurement – 393ft Laser Distance Meter Mute Function with Backlit LCD Screen, Single-distance Measurement, Continuous Measurement, Area, Pythagorean Modes
- Class II laser, 5mW output, HIGH ACCURACY – With laser precision technology, accuracy ups to ±1/25 inch, measuring distance extends to 393 feet; Switchable among M/In/Ft for free adjustment
- Multiple Measurement Modes: Three measuring reference Rear/Front/End piece allows you to project Single Distance/Area/Volume Measurement, Continuous Measurement, Auto Level/Height Measurement, Measurement by Pythagoras; Optional side measure button enables much more measuring convenience; Internal memory can store 20 groups measurements
- Durable and Portable Design: Covered soft rubber is for more shock-resistant and wear-resistant; IP54 waterproof level and dust-proof function protect the laser distance measure to the maximum extent; Wrist strap and portable pouch let you hold the meter steady and carry easily
- LCD Backlight and Unit Change: Four-line of data LCD display and high definition backlight enable us to compare data more clearly and conveniently; Free adjustment unit among M/In/Ft/Ft+In for your needs Efficient and Reliable Service: Broad use for home, construction and industries, especially in large areas such as rooms, apartments, buildings, real estates, factories, warehouses etc
- WHAT YOU GET – Laser Measuring Device 164Ft; 2*1.5V AAA Batteries; User Manual; Carry Pouch; Hand Strap; White plastic board; Package Box; 24 Months Warranty.
-
Digital Temperature and Humidity Meter – with Dew Point and Wet Bulb Temperature
- 2 in 1 digital Humidity and Temperature Meter. Accurately measure any environments temperature, relative humidity (RH), dew point, wet bulb temperature,
- One-step switch between °C and °F,
- Device will power off automatically to save battery when not in use in several minutes,
- Adjustable LCD backlight for clearly showing data,
- Powered by 9V battery which is included.
-
Digital Turbidimeter Turbidity Meter 0.001 NTU 0-10 – 100-500 NTU
- Microcomputer configuration; touch keyboard;
- LCD display with backlight; standard serial RS232 interface;
- capable of simultaneously display date, time, measuring value and unit.
- Light source with long life
- With data storage and inquiry function; functionalized with non-linear data treatment and smoothing
-
Digital Water Turbidity Meter Portable Turbidimeter Water Quality Turbidity Detection Analyzer Tester 0~200 NTU
- -Please note: Due to the Air traffic control, the Calibration Fluid is not allowed to be shipped by airplane, so the meter doesn’t come with the Calibration Fluid.
- -It is used to measure the scattering degree of light produced by insoluble particulate matter suspended in water or transparent liquid
- -Can also quantitatively characterize the content of these suspended particulate matter
- LCD display, auto shut off, two use for AC and DC
- It can be widely applied to turbidity detection of water.
-
Edge Finder, 3/8″ Dia. Shank, .200″ Dia. Tip
- Used in a milling machine to find the workpiece edge
- All working surfaces are hardened and ground
-
Edge/Center Finder, 3/8″ Diameter Shank, 0.200″ Diameter Tip
- Used in a milling machine to find the workpiece edge
- All working surfaces are hardened and ground
- Centerfinder end is used to find hole centers, and aline the spindle with a punch mark or scribed line
-
Handheld CO Detector,Carbon Monoxide Meter, Portable CO Gas Leak Detector, Gas Analyzer, High Precision Detector, 0~1000ppm
- This Portable detector can continuously monitor the CO gas concentration accurately in the surrounding environment.
- Sound alarm works when CO gas concentration reaches the level of the alarm.
- Compact size, light weight, easy to carry and operate.
- Large LCD display and ℃/℉ switch.
- The concentration of alarm value can be freely set. Auto shut off in 10 minutes without any operation.
-
HM-934-1+ Barcol Impressor Digital Display Hardness Tester with Measure Range 0~100Hba Amount to 25~135HBW for Aluminum Processing and can Measure HBA, HB, HV, HW, HRB/HRE/HRF/HRH
* A digital indentation hardness tester, is the latest design and development of our company. * It is characterized in that provided with a balance positioning, a digital display of hardness value, and a non disassembly calibration and adjusting. * It is with good stability, convenient calibration, and high accuracy of detection. * The relevant industry standard is ASTM B648-00, ASTM HD2583-07, GB/T 3854-2005. * Able to measure the hardness of the material (Hba).